Why Won’t My Netgear Range Extender Connect to the Router?

Not being able to connect the Netgear extender to the router can become really annoying. Have you been experiencing the same issue? If yes, then fret not! The troubleshooting tips mentioned in this article will help you get rid of the ‘Netgear extender won’t connect to the router’ issue in a jiffy. So, waste no more time, and read on.

Before you get down to the troubleshooting steps, let’s first shed some light on the factors that might be stopping your extender from connecting to the WiFi router. Here are some of the most common reasons why your WiFi devices are not connecting:

  • You haven’t properly configured your Netgear extender
  • The firmware of your extender is either corrupted or outdated
  • Loose cable connections
  • Your WiFi range extender isn’t placed at its ideal location
  • The distance between your WiFi devices is too much

Now that you know what might be pulling your extender back from connecting to the router, walk through the troubleshooting steps mentioned below to fix the issue.

Resolved: Netgear Extender Won’t Connect to Router

Complete the Netgear Extender Configuration

One of the biggest reasons why your Netgear extender won’t connect to the router is because an incomplete configuration. Chances are that you haven’t set up your extender properly. To fix the issue, it is recommended that you install your device from scratch. And while doing so, keep the following points in mind:

  • Avoid typos while typing www.mywifiext.net in the address bar of your web browser.
  • Whatever web browser you use, make sure it is up-to-date.
  • Make sure that your Netgear WiFi extender is receiving an adequate power supply. 

Place Your Netgear Extender and Router Nearby

If your Netgear WiFi range extender is placed far away from router, then it’s quite obvious why you’re facing connectivity issues. Thus, make sure that you place your Netgear extender and WiFi router in close proximity. 

Another thing that you can take care of is connecting your WiFi devices with the help of an Ethernet cable. Connecting your devices wirelessly is prone to risks. Hence, if you want a risk-free experience with your extender, then connect it to the router with a cable.

Update the Firmware of Your Device to the Latest Version

An updated firmware ensures that your device works properly. So, if the firmware of your extender is outdated, then you already know why your device won’t connect to the router. Therefore, access the mywifiext.net setup wizard and update the firmware of your Netgear extender right away!

Here are the steps that’ll help you update the firmware of your WiFi device:

  • Turn on your Netgear extender after plugging it into the wall socket.
  • Create a connection between the extender and the WiFi router using a cable.
  • Open up a web browser on your PC and access mywifiext.net
  • You can also make use of the default IP to log into your Netgear extender.
  • Go to Settings. Click on the Administration option, and select Firmware Update.

If even updating the firmware of your Netgear extender didn’t resolve the issue, then looks like you are left with no other option than to reset your device. 

Restore Your Range Extender to Factory Default Mode

Note: Restoring your Netgear WIFi range extender to its default settings means that whatever changes you’ve made to your device till date will go poof!

Follow the guidelines mentioned below to reset your WiFi device:

  • Locate the Reset button on your extender.
  • Found? Good. Now, take an oil pin or any other sharp object.
  • Carefully insert the sharp object inside the hole and press the Reset button.
  • Wait for a couple of seconds before releasing the button.

The Bottom Line

Once you are resetting your Netgear WiFi extender, try to connect it to the router. Any luck? If yes, congratulations! We are glad that this post could be of some help to you.

Share your love
Christophe Rude

Christophe Rude

Articles: 15893

Leave a Reply

Your email address will not be published. Required fields are marked *